This is a standard table pneumatic marking machine, which converts the marking content into digital control signals through computer marking software, transmits the digital control signals to the controller, and drives the printing needle to move according to the set trajectory in the two-dimensional plane of X.Y. at the same time, the printing needle makes high-frequency micro-impact movement under the action of compressed air, so as to print concave marks composed of dense lattice on the worktable surface.

Marking features: large depth, direct marking output through the computer, marking neatly and clearly.

Typical applications: auto parts, instrumentation, machinery, automotive, signage and other industries.

Model characteristics

1. The worktable matrix is made of high-quality aluminum alloy mold and formed as a whole, and the lifting column with double guide bar structure is used for firm, stable and high precision. Double linear guide, stepper motor, solenoid valve, linear bearing with self-lubricating seal and dustproof, long wear life.

2. Control system: using arm 32-bit signal processing chip, the processing speed is faster and more accurate.

3. Control mode: the new vibration control mode of cylinder liner and needle valve is adopted, and the marking speed is 1-2 times higher than that of the same kind of machines.

4. Power supply: the linear power supply is replaced by an efficient and anti-interference switching power supply, which is more stable, energy-saving and environment-friendly.

5. Hardware: the circuit provides anti-interference design and has strong adaptability to the working environment.

In particular, the integrated control board: the use of PC hard disk box package, greatly improve the three anti-dust (anti-dust, anti-oil, anti-metal dust) grade, good shielding, easy to install, the equipment is more stable and durable.

6. The control box adopts a simplified panel to make the operation easier.

7. Marking software: the software upgrade increases the working mode of "more than one drag", and optimizes the way the needle returns to the origin.

8. The PLC interface is reserved and controlled by the host computer, which is more suitable for the automatic printing system of the modern factory, and the Icano interface can be installed according to the customer's needs to improve the work efficiency.